CONSTRUCTION STEEL REINFORCEMENT


PRODUCT OVERVIEW

Wet-type steel cladding or outer-bonded steel reinforcement is the process where exterior steel cladding is attached to a frame or other surface to protect it against weather deterioration. Bond Materials supplies a high-strength, durable adhesive that tightly bonds the steel and surface components so as to provide a solid and reliable design. 

The products have the following characteristics:

Good fluidity and easy construction

High mechanical strength to ensure the overall performance of reinforcement components

Low shrinkage, excellent long-term carrying capacity and anti-aging properties.

Waterproof performance and corrosion resistant.

Eco-friendly products, construction safe and reliable


APPLICATIONS

CoolBond® Epoxy is a two-component outdoor epoxy series product developed by The Bond Chemicals and Australian BTA Company. It has excellent outdoor weather, acid and alkali resistant properties. CoolBond® EP-211 is a multi-purpose epoxy adhesive mainly used for bonding various structural engineering materials such as metal, concrete, stone, brick and a variety of hard plastics.


PRODUCTS


APPLICATION GUIDE

1.  Clean the designated area thoroughly.

2.  Add product A to curing agent B into a container at ratio of 2:1 and mix thoroughly.

3.  Only apply to the dry and clean surfaces at temperature above 5 ℃;

4.  Do not spray water on the surface within 4 hours of application.

5.  Do not shift the application objects before curing.


TECHNICAL PARAMETERS

Product Name EP-211
Mix Ratio A:B (weight ratio) A:B=2:1
Mixture Appearance Black or gray viscous liquid
Mixture Density 1.25
Application Time (25ºC, min) 30 - 40
Initial Curing Time (25ºC, hours) 2
Curing Time (25ºC, hours) 24
Hardness (Shore D) Comply with concrete structural re-enforcement standard GB50367

















CONSTRUCTION STEEL REINFORCEMENT


PRODUCT OVERVIEW

Wet-type steel cladding or outer-bonded steel reinforcement is the process where exterior steel cladding is attached to a frame or other surface to protect it against weather deterioration. Bond Materials supplies a high-strength, durable adhesive that tightly bonds the steel and surface components so as to provide a solid and reliable design. 

The products have the following characteristics:

Good fluidity and easy construction

High mechanical strength to ensure the overall performance of reinforcement components

Low shrinkage, excellent long-term carrying capacity and anti-aging properties.

Waterproof performance and corrosion resistant.

Eco-friendly products, construction safe and reliable


APPLICATIONS

CoolBond® Epoxy is a two-component outdoor epoxy series product developed by The Bond Chemicals and Australian BTA Company. It has excellent outdoor weather, acid and alkali resistant properties. CoolBond® EP-211 is a multi-purpose epoxy adhesive mainly used for bonding various structural engineering materials such as metal, concrete, stone, brick and a variety of hard plastics.


PRODUCTS


APPLICATION GUIDE

1.  Clean the designated area thoroughly.

2.  Add product A to curing agent B into a container at ratio of 2:1 and mix thoroughly.

3.  Only apply to the dry and clean surfaces at temperature above 5 ℃;

4.  Do not spray water on the surface within 4 hours of application.

5.  Do not shift the application objects before curing.


TECHNICAL PARAMETERS

Product Name EP-211
Mix Ratio A:B (weight ratio) A:B=2:1
Mixture Appearance Black or gray viscous liquid
Mixture Density 1.25
Application Time (25ºC, min) 30 - 40
Initial Curing Time (25ºC, hours) 2
Curing Time (25ºC, hours) 24
Hardness (Shore D) Comply with concrete structural re-enforcement standard GB50367
















Contact us

Service Hotline:400 825 1528

Phone:+86-20-82210601

Fax:+86-20-82210626

Mailbox:sales@gzthebond.com