SOLAR PANEL BONDING AND FILLING LAYER MATERIAL



In the new energy town of Tongli, Suzhou, there is a magical road. The vehicle driving through is not only unmanned, but also can be charged while driving. This is the world’s first 3-in-1 solar road, integrated photovoltaic road, wireless charging and unmanned driving into one transport environment. In addition to the above functions, it can melt snow and ice, provide traffic signages etc. So it is called "a smart highway without power outages"

This solar highway requires very high performance paving materials. Apart from bearing the heavy traffic loads, it also requires high transparency to ensure power generation efficiency.  with its high performance, high strength and high transmittance, Bond Materials’ innovative cold-mix epoxy asphalt becomes the ideal solution for solar road pavement.






PRODUCT OVERVIEW


CoolBondTM Epoxy is a two-component outdoor epoxy series product developed by Bond Materials Co. Ltd and Bonding Technology Australia (BTA). It has excellent weather resistant and acid & alkali resistant properties. It is ideal for solar road photovoltaic panel adhesion. It can also be used for bonding various construction materials such as metal, concrete, stone, brick wall and hard plastics. It can not only used for solar panel bonding for solar road pavement, but also for bonding and anchoring of cross-construction materials such as normal roads and bridges and cement concrete surfaces.



PRODUCT PROPERTIES

1.   Fast curing and high strength.

2.   Thixotropy, not hooligans.

3.   Excellent weather properties, acid and alkali resistant, aging resistant, UV resistant.



PRODUCTS


APPLICATION GUIDE

1. Clean the application surface thoroughly, remove the loose objects, dust and grease etc.
2. Do not apply to the surface with water and moist. Apply the materials at and above temperature of 5 °C.
3. Do not spray or rinse the surface with water within 4 hours after construction.
4. Do not move the adhesion objects before the glue is completely cured;



TECHNICAL PARAMETERS


PRODUCT

Appearance

Density

Viscosity @30ºC

Setting Time @25

Hardness Shore D

Part A

Light Yellow

11

80000-10000

30 - 40 mins

D65-70

Part B

Gray Paste

11

60000-80000

30 - 40 mins

D65-70

Mixing Ratio(Weight

A:B=1:1

Appearance(After Mixing

Gray paste

Density(After Mixing

1.6

Application Open Time @25°C

40-60 mins

Initial Curing Time @25°C

2.5 hours

Full Curing Time @25°C

24 hours

Specification

Comply to GB50367 Concrete structure reinforcement design specification














SOLAR PANEL BONDING AND FILLING LAYER MATERIAL



In the new energy town of Tongli, Suzhou, there is a magical road. The vehicle driving through is not only unmanned, but also can be charged while driving. This is the world’s first 3-in-1 solar road, integrated photovoltaic road, wireless charging and unmanned driving into one transport environment. In addition to the above functions, it can melt snow and ice, provide traffic signages etc. So it is called "a smart highway without power outages"

This solar highway requires very high performance paving materials. Apart from bearing the heavy traffic loads, it also requires high transparency to ensure power generation efficiency.  with its high performance, high strength and high transmittance, Bond Materials’ innovative cold-mix epoxy asphalt becomes the ideal solution for solar road pavement.






PRODUCT OVERVIEW


CoolBondTM Epoxy is a two-component outdoor epoxy series product developed by Bond Materials Co. Ltd and Bonding Technology Australia (BTA). It has excellent weather resistant and acid & alkali resistant properties. It is ideal for solar road photovoltaic panel adhesion. It can also be used for bonding various construction materials such as metal, concrete, stone, brick wall and hard plastics. It can not only used for solar panel bonding for solar road pavement, but also for bonding and anchoring of cross-construction materials such as normal roads and bridges and cement concrete surfaces.



PRODUCT PROPERTIES

1.   Fast curing and high strength.

2.   Thixotropy, not hooligans.

3.   Excellent weather properties, acid and alkali resistant, aging resistant, UV resistant.



PRODUCTS


APPLICATION GUIDE

1. Clean the application surface thoroughly, remove the loose objects, dust and grease etc.
2. Do not apply to the surface with water and moist. Apply the materials at and above temperature of 5 °C.
3. Do not spray or rinse the surface with water within 4 hours after construction.
4. Do not move the adhesion objects before the glue is completely cured;



TECHNICAL PARAMETERS


PRODUCT

Appearance

Density

Viscosity @30ºC

Setting Time @25

Hardness Shore D

Part A

Light Yellow

11

80000-10000

30 - 40 mins

D65-70

Part B

Gray Paste

11

60000-80000

30 - 40 mins

D65-70

Mixing Ratio(Weight

A:B=1:1

Appearance(After Mixing

Gray paste

Density(After Mixing

1.6

Application Open Time @25°C

40-60 mins

Initial Curing Time @25°C

2.5 hours

Full Curing Time @25°C

24 hours

Specification

Comply to GB50367 Concrete structure reinforcement design specification













Contact us

Service Hotline:400 825 1528

Phone:+86-20-82210601

Fax:+86-20-82210626

Mailbox:sales@gzthebond.com