HIGH FRICTION TRANSPARENT EPOXY ASPHALT FOR PHOTOVOLTAIC ROAD SURFACING

In the new energy town of Tongli, Suzhou, there is a magical road. The vehicle driving through is not only unmanned, but also can be charged while driving. This is the world’s first 3-in-1 solar road, integrated photovoltaic road, wireless charging and unmanned driving into one transport environment. In addition to the above functions, it can melt snow and ice, provide traffic signages etc. So it is called "a smart highway without power outages"

This solar highway requires very high performance paving materials. Apart from bearing the heavy traffic loads, it also requires high transparency to ensure power generation efficiency.  with its high performance, high strength and high transmittance, Bond Materials’ innovative cold-mix epoxy asphalt becomes the ideal solution for solar road pavement.

PRODUCT OVERVIEW

CoolBond^TM Epoxy is a two-component Cold-mix Epoxy Asphalt series product developed and patented by Bond Materials (Guangzhou) Co. Ltd. and Bonding Technology Australia (BTA) Pty Ltd. It has excellent weather resistance, acid and alkali resistance properties. The product has high transparency and good temperature stability. It is suitable for paving high-quality photovoltaic road and any other road / bridge deck pavement with high anti-skid requirements.

PRODUCT CHARACTERISTICS

1.   High transparency and high bonding strength.

2.   Excellent weather resistance and durability.

3.   Acid-resistant, general chemical resistant.

4.   Suitable for dry and cold climate. Application temperature -30 °C and above.

PRODUCTS

APPLICATION GUIDE

1.  Mix the main product (Part-A) and curing agent (Part-B) thoroughly at the ratio according to the product datasheet.

2.  Apply the mixture immediately after mixing.

3.  Product shelf life is 6 months from the date of manufacture.

4.  Store at 5-30 °C. Avoid direct sunlight.

5.  Do not mix with other products.

TECHNICAL PARAMETERS